MTC 2m 3/8&3/16 tufting machine cut pile
Updating…… Getting fibers or filaments into carpet - since 2003 China
Sales:Mr. Cody Mobile:0086 1300 4383 037 Email:wytex80@163.com
When we speak of home textile, this can mean upholstery like seat covering and curtains, but automotive,garment velvet, shadow velvet, velvet with reflect warp,... also belong to this category.Velvet Loom for weaving plain or geometrically designed velvet for upholstery, curtains, car and bus seat covering, chiffon velvet, long pile and woven fur, technical fabrics,... It has been developed to produce velvet fabrics in a width of 3 meter, offering huge flexibility to our customers.Velvet Innovator with jacquard is equipped with a separated servo drive for unlimited jacquard capacity. It is for weaving Italian velvet or free design velvet, upholstery, automotive velvet, curtains and dress velvet, shadow velvet or upholstery with reflect warp. Light carpets and prayer rugs can be produced in a width of 3 meter.The ground warp yarns can be on dobby frames, but the highest flexibility is reached when the ground warp yarns are going through the harness, of which the movement is controlled by the jacquard. In this execution ground warp designs can be made next to the conventional designs. Additional effects can be created by the implementation of our weft selector which can quickly change between up to 2 x 4 different wefts. The weft selector is driven by compact stepper motors.
The Loop-pile Carpet Loom(Witon) is a double rapier weaving machine, single face carpet weaving machine for short softloops, long softloops, flatweave effects and the possibility to weave sisal look. It is suitable for both wall to wall qualities and rugs. It exists in 3, 4 as well as 5 meter width. The machine is built in dobby frame or jacquard execution, depending on the number of colours that is used.Loop pile carpet weaving loom is the parallellogram reed beat-up ensures reduced shed motions and loops standing upright,The fork type lancet holder offers space to the pile yarns, which increases efficiency and reduces the incorporation of the yarns.Wilton loom is also for cut pile carpet based on customers.
Technical Description and scope of supply
MTC 2m 3/8&3/16 tufting machine
working width: 2.2m
gauage: 3/8"&3/16"GG
Pile Height: 10-70mm Adjustable stitching stroke (depth)
Performance: level cut pile
Speed:450-1000rpm
Machine frame:Full cast HT250 and main drive shaft 45# steel modulation polishing.Main drive part all using NSK and IKO bearings of Japan brand,
The upper frame section of tufting machine involving the needle drive mechanism is called the top housing，or head,and middle housing with right-left boxes to drive the stitch parts movement .
Weight: About 9 tons Main tufting machine dimension 5540(W)x1650(D)x2600(H) without creels
Bars/Stitching Main Elements of MTC Tufting Machine：
All part names and part numbers are described and can be identified further by MTC diagrams .
The lower stitching area supporting the cloth and containing the stitching units is the bed plate. The bed plate has a movable bedrail for pile height adjustment . The vertical compartments at each end of the head，containing the linkages and drives for hooks and knives，are called the right and left end boxes. Together，with the legs， the above-mentioned elements make up the carpet stitching parts .
Bars: Straight structure single needle bar
1 pcs of Yarn collecting plate
Include 462pcs needles, loopers, forks,knives according to 2.2m configuration.
MTC automation adjustable bed plate with bedrail and locking selves system
Stitch Length: 10-50 stitch per 10cm (pur customers requests)
Yarns feeding
one set of double yarn feeding roller
primary backing feed
1 set of Double servo backing control system, easy to adjust stitch by software
Electrial control cabinet and software
Total Power: 30KW, 380V AC 3Phase 50Hz
Start control cabinet, soft start/stop, High Parking, Fault indication, meter counter,Configure front pull switch, front photoelectric switch
Optional Device
2x462 ends creel,cone holders are fixed in pairs in order to magazine the cones(one cone running and one cone as back up)
The mending frame and carpet winding up to 200m length.
off line rewinding machine before coating to change the pile direction of the carpet.
spare part list ( free supply)
No. part name quantity
1 needles,loopers,forks each 10 pcs
2 knives block 2 pcs
3 Main motor belt 2pcs
4 Contact 2 pcs
5 Oil seal 10pcs
6 Oil pump 2pcs
7 all time belt 1set
8 hand splicer 4pcs
The following documents shall be presented by MTC:
One complete set of the following technical documents written in Chinese and/or English shall be packed together with each consignment ,or delivered to the BUYER to other means chosen by SELLER,including but not limited to express courier,subsequent to shipment of machines:
a. Foundation drawings
b. Wiring instructions, of electrical connections and/or pneumatic and/or hydraulic connections;
Shipment/Packing:By Seaworthy Container,incl. Packing on pallets/crates.International standard fumigation mark should be obviously and clearly identified on the outside of the package.
Shipping advice
Within 1 week working days after the machines have been shipped,SELLER shall notify BUYER the CI,Packing List,name of sailing date of the carrying vessel and port of destination.
Copyright:It is not possible to copy news if "CTT Source" statment,please contact us for approval and announce"Copy from CTT Tech-Textile"