Full Cross Lapping Spunlace Nonwoven Production Line
(for details offer please contact Mr. Cody the sales phone number 0086 13004383037 please )
2 carding and 2 cross lapping
Raw materials:bleached cotton, polyester or viscose 1.5-2D x 38-51mm.
Weight : 30-260gsm CV 5%
Strength rate of CD:MD = 1:1
Working width: 2500mm 3500mm
Max. productio speed: 120m/min
Application: Tissues,PU substrates,PVC substrates,Auto textiles (recycle PET)
Jet strips:single or double lines,the water pressure is 10-65-200 bars in case different process,water recycel 100-200m3/h,diameter as 0.1mm,0.12mm,0.14mm pur 16-24 holes/com along with the jet strips.
A. Coating machine: 1 set
1). Machine width :2500mm.
2). The surface of the steel roller is chromium plated, and the surface of the rubber roller is covered with silica gel.
3). The scraper part is made of 304 stainless steel.
4). Electric lifting of slurry tank.
5). Pneumatic pressure of the press roller is applied to adjust the left and right pressure respectively.
6). Roll drive: 5.5KW frequency conversion motor with gear reducer, sprocket drive.
B. Four drums oven: 1set (heating gas or electrical power)
1. Effective width of the machine: 2500mm.
2. Machine form: four round net hot air type.
3. Round screen: diameter 1400mm, the appearance of bread imported stainless steel screen.
4. Heat source: steam or natural gas direct combustion.
5 drying room temperature: the highest 150℃. Automatic temperature control.
6. 4 hot air circulation fans.
7. One moisture exhaust fan, power 7.5KW, frequency conversion speed regulation.
8. There are 4 main drive motors in round network, with a total power of 16KW. Sprocket of reducer motor rotates and frequency conversion speed regulation.
9. The windward side is equipped with stainless steel wire filter screen.
10. Heat insulation door plate thickness 120mm, with Windows with high temperature resistant foam silicone rubber sealing strip.
11. There are two temperature measuring points in the drying room. The temperature is measured by PT100 platinum thermal resistance thermometer, and the temperature is automatically controlled by the instrument and temperature control valve.
12. High temperature resistant graphite bearing is used in the rotary mesh shaft machine, which is easy to replace.
上浆机 : 1台
1).机幅:2500mm。
2).钢辊表面镀铬，橡胶辊表面包覆硅胶。
3).刮刀部分全部采用304不锈钢制作。
4).浆槽电动升降。
5).压辊气动加压,左右分别调压。
6).轧辊传动：5.5kw变频电机配齿轮减速机，链轮传动.
四圆网烘燥机：1台 （热源待定）
1.机器有效幅宽： 2500 mm。
2.机器形式：四圆网热风式。
3. 圆网：直径ø1400mm,外表面包进口不锈钢丝网。
4.热源：蒸汽或天然气直燃。
5.烘房使用温度：最高150℃。自动温控。
6.热风循环风机4台。
7.排湿风机1台，功率7.5kw，变频调速。
8.圆网主传动电机共4台，合计功率16Kw，减速电机链轮转动，变频调速。
9.迎风面设不锈钢丝过滤网。
10.隔热门板厚120mm，设有视窗采用耐高温发泡硅橡胶条密封。
11.烘房内设有2个测温点，采用PT100铂热电阻温度计测温，通过仪表和温控阀实现温度自动控制。
12.圆网轴机内采用耐高温石墨轴承,更换方便。