Technical Data:(Welcome to contact Mr. Cody if any question ,Wechat:sunriselumin)
1.One carding line
2.Two Carding line
Raw materials: polyester or viscose 1.5-2D x 38-51mm.
Weight : 30-120gsm CV 4%
Strength rate of CD:MD = 2.5:1
Working width: 2500mm 3500mm
Max. productio speed: 120m/min
Application: Tissues,Wipes,Face Mask,PVC substrates
Water treatment information as following:
A. Air/Water separation system :1 set
1. 2 garden drums equipped with a soda separator, all 304 stainless steel plate material. High pressure fan 132KW, return pump 15KW.
2. Equipped with negative pressure gauge and liquid level control.
3. The air ducts behind the muffler shall be responsible by the user.
B. High pressure water supply system :1 set
1. Large diameter water supply main pipe and each water supply branch pipe 1 set. The diameter of the main pipe is 400mm, and the diameter of the branch pipe is matched with the high pressure pump. The pneumatic butterfly valve is installed, and the pump is soft connected.
2. 1 medium pressure pump: power 7.5KW, head: 120m.
3. 5 high-pressure pumps: 1 high-pressure pump with power of 55KW and pressure of 6Mpa ,Power 75KW high pressure pump 1, pressure 8MPa,Power 90KW high pressure pump 1, pressure 10Mpa,2 high-pressure pumps with 110KW power and 12MP pressure.(The high pressure pump power is subject to the actual allocation)
4. 5 sets of high pressure water supply pipeline, equipped with accumulator and high pressure hose connected to the water spinner.
C. Water squeeze machine: 1 set
1. Machine width: 2500mm.
2. Form: steel wheel and rubber roller, arranged up and down.
3. The steel roller is made of seamless steel tube with stainless steel surface, and the end face and shaft head of rubber roller are covered with stainless steel plate.
4. Pressure: pneumatic pressure ≤4kgf/cm2.
5. The bottom of the machine is equipped with stainless steel slurry tank and cloth guide roller, which can carry out sizing process.
6. Transmission: 5.5KW frequency conversion motor,PLC control.
汽水分离系统:1套
1． 2个园鼓配用1台汽水分离器,全部采用304不锈钢板材料。高压风机132kw,回水泵15kw。
2.配有负压表及液位控制。
3. 消声器后引风管由用户负责。
高压供水系统:1套
1.大直径供水总管及各供水支管1套。总管直径400mm，支管直径与高压泵配套，安装气动蝶阀，与泵软连接。
2.中压泵1台：功率7.5 Kw，扬程：120m.
3.高压泵5台：功率55Kw高压泵1台，压力6Mpa,功率75Kw高压泵1台，压力8Mpa, 功率90Kw高压泵1台，压力10Mpa,功率110Kw高压泵2台，压力12Mp,（高压泵功率以实际配用为准）.
5.高压供水管道5套，配有蓄能器和高压软管与水刺头连接。
轧水机 : 1台
1.机幅： 2500mm。
2.形式： 钢轮与橡胶辊,上下排列。
3.钢辊采用无缝钢管表面包不锈钢,橡胶辊端面及轴头包不锈钢板。
4.压力： 气动加压≤4kgf/cm2。
5.机器底部配不锈钢浆槽和导布辊，可以进行上浆工艺。
6.传动： 5.5kw变频电机,PLC调节控制。