1600 Nonwoven Lamination Production Line
A. Introduction
1. Technology Overview
Using PE raw chips as the main material, going through extruding and melt flow casting laminating, and then forming a winning combination of films and Non-woven fabrics, finished by edge trimming and winding. This is one kind of the series line, with roller width 1800mm.
2. Processing
Purchasing/ producing particles→gathering raw material→extruding→ forming
→subsequent processing→ winding.
3. Main features of the lamition line
1). Main material: PE raw particles, LDPE,PP etc.
2). Product weight: up to need. Usually 18-425gsm paper or nonwovens we experienced
3). Working width: 1600mm (end fabric)
4). Mechanical speed: Max 150m/min,depend on the materials and products .
5). Extruder: Special chip plasticizing extrusion screw, max extrusion capacity 180kg / h.
6). Winding forms: surface friction rolling winding,Paper pipe size: Φ76mm.Max wind Φ600mm
7). Machine electrical control mode: inverter and electrical components linkage,
8). Drive motor: AC inverter motor, asynchronous motor and cycloidal-pin gear speed reducer.
9). Inverter: AC digital control inverter.
10). Temperature control mode:PID Thermostat control, range 0-400℃, accuracy ±1
11). Extruder heating: electrical heating
12). Power supply: three-phase 380V, 50HZ
13). Power: Installation power 150KW (80KW when in stable status but auxiliary equipment is not calculated).
14).Cooling water: temperature 16-25, flow 2-3T / H, water pressure above 2kg.
15). Compressed air: pressure above 6kg
16).Line space: 13000mmx13000mmx3500mm Total weight 15T around
B. Main parts of the line:
2 positions fabric take-off device,automatic PE feeding system, Extruder, Screen changer,film T-die mold,main body back and forward move and lift able,forming,extension,edge cutting,winder
Spare parts as following:
Temperature panel, 2pcs
current meter panel, 2pcs
Thermocouples 2pcs
Extrusion screw heating rings 1pcs
T-die heating sticks 5pcs
Cutting knife 2pcs
Air joints several
Normal screws several
Air line pipe 10m
C.Installation and delivery
60 days delivery time after down payment received.
1. Technical Guarantee
One year quality guarantee but without easy broken parts and customer site personal issue.
2. Seller supply the following documents to buyer
1). Production line installation base drawing (in one weeks after the contract comes to effect)
2). Main parts certificate, manual, samples
3). Device structure diagram (attached to the manual)
4). Electrical circuit diagram
3. Installation Details
1). After shipping the machine to buyer’s place, buyer need to prepare necessary items for installation, including water, electricity, gas, site, basic tools, raw materials, etc.
2). After all things prepared, please inform us at least 10 days before the installation.
Our company will send technical workers to buyer’s place at first time to ensure normal and safe working of the machine.
3).The return air tickets /food/hotel are all born by buyer as well as daily one technician pocket fee 100USD.
常州聚武机械有限公司
SELLER：Changzhou JuWu Machinery Co.,Ltd
Address : No.7-1Fulin Road, Xilin street , Zhonglou Zone, Changzhou City, Jiangsu Province, China.
地址：中国江苏省常州市钟楼区西林街道富林路7-1号
Tel电话 : 0086-519-68875556
Fax传真： 0086-519-68875557
Mr.Cody| Vice President| Mobile:0086 1300 438 3037