MTC 5 Meters Mutli/double -Loop pile Sliding 2x needle bar Tufting Machine 1/5+1/5 =1/10 Gage, 5 Meters working width with complete
accessories, Machine Computer, Software, Servo motors, rollers, Tested and delivered in fully working condition.
Douple Loop Pile Tufted Carpet Having following and other Patterns / designs with different Pile Heights will be manufactured on this 1/10" Gage machine from BCF P.P Yarn 1500 ~2800 dtex with P.P / Non-Woven Primary Backing.Variable Eccentric Drive, Right Hand (R.H) Machine , S Type Twist.
Pile heights Min 3.0mm to Max 10mm.
Mechanical speed 150-450 RPM, Number of Stitch Min 20 to Max 60 needles/100mm.
Fornt Needle Bar Sliding 15x5.08=76.20mm (Right Side)+15x5.08=76.20mm (Left Side), Total sliding =(76.20+76.20=152.4mm Front needle bar) as pur customer samples requests as well as Rear Needle Bar Sliding 15x5.08=76.20mm (Right Side)+15x5.08=76.20mm (Left Side), Total sliding =(76.20+76.20=152.4mm Rear needle bar).Two (2) Sliding needle Bars DSNB (1/5 + 1/5 = 1/10"gage), supplied with 150+150 =300*6 =1800 Block Needles, Both Bars Driven with Two (2) servo motor.One(1) HookBar 1/10"gage supplied with 150 *12 =1800 Block Hooks,One (1) Finger / Fork Bar 1/10" gage, supplied with 150*12 =1800 Block Fork / Fingers. Pattern Yarn Feed Rollers, Four(4) Roller sets Front side, Four (4) Roller sets Rear Side, Total Eight (8) Roller sets for both sided Yarn Feeding, Front side 2x yarn Groups.Rear Side 2 x Yarn Group , Total Four (4) Yarn Groups with Eight Rollers, Driven with Four(4) Servo Motors.Pattern Yarn Feed Rollers, Provision/Side Plate For Future Additional Four(4) Roller Set Front Side and Side Plate for Future Additional Four(4) Roller Set Rear Side.Yarn Feed Roller, Front Side six(6) Roller sections, 6x4 =24 rollers, Dia 90mm each, Front 12x Rollers Removable. Supplied with Sand Paper covering Yarn Feed Roller, Rear Side six(6) Roller sections, 6x4 =24 rollers, Dia 90mm each, Front 12x Rollers Removable. Supplied with Sand Paper Covering Yarn Pull Rollers, All YARN Pull Rollers Aluminum made with Grooves, Two (2) x Yarn Pull Roller Set Fornt Side, Two (2) x Yarn Pull Roller Set Rear Side, Front and Rear Yarn Pull Roller Driven With Total Two (2) xServo Motors.Total Four (4) Roller sets for both (Front and Rear) Yarn Pulling,Supplied with Two (2) Yarn Collecting Plates Front Side and Rear Side.Total Ten (10) Servo Motors to be supplied, 4x 3kW Servo motor with Gear for Yarn feeding Inovance China, 2x 4.4kW Servo motor for Double Sliding Needle Bar Yaskawa Japan.
2x 3kW Servo motor with Gear for P.P Backing Front and Rear Side, Inovance China, 2x4.4kw Servo Motor With Gears For Yarn Pull Rolls Front and Rear Side Inovance China.Two(2) Main A.C Electric Motor, 7.5kW each, 4P, for Left and Right Side of Machine at Top supplied with Pulleys / Belts and A.C Frequency Inverter Complete Control.Complete Electric control system / Cabinet Supplied with PLC Innovance, Touch Screen, Power Supply, Transformer, Motor Switch , Cables, Servo Controllers, The Electric Control System Must have Provision for Future Additional Four (4) Yarn Feed Rollers sets / Groups.Control Cards, Accessories, Sensors, Encoders. Power and Wiring, Machine Pattern control system / Computer, Machine pattern Control Software Complete Ready and Tested.
All Electrical System Should be Good for (3 phase, 400V+/- 5% / 50HZ ),Machine Slow start- stop, Automatic needle-up positioner, fault indication, auto Carpet Length Counting Metre. One Backing cloth electric lifting unit with manual central adjustment, one P.P Backing Cloth Shaft Operational manual.
We offer tufting systems with all components from a single source,ALL Needles, Hooks, Fingers / Forks Block Type, Local Chinese Brand Jingerli or Yongjia,be interchangable with Groz Beckert Germany Blocks.Tufting Needle Module簇绒针块 completely range of design for every conceivable application.Optimum cutting quality and Coordinated materials and tolerances ,which benefits to customers with excellent price-performanceratio,high quality and perfect carpet surface,easy installation and commissioning.Cut pile looper module割绒弯钩块增加添钨厚度，可以反复打磨extended body tungsten insert for multiple regrinding capability.Tufting knife significantly extended service life befor regrinding.Reed Finger Module托布叉块 precise execution for stable support of the backing material.